Posted 16 September 2004 - 07:36 PM
I live in Milwaukee Wisconsin. Just hooked up a HD10-250 in the Great Room. We receive our OTA CBS HD channels on frequency 46, channels 58-1, 58-2, 58-3, 58-4 and 58-5. 58-1 is typically the HD feed to watch the CBS programming. The new HD Tivo has a strange problem. When I tune to 58-1, the channel banner is displayed for the program being shown, but, then I get the message "Searching for signal: Antenna in". If I go to setup and check my signal strength it indicates a signal of 80+. If I go to channel 58-2 the channel banner displays the program that should be on 58-2, but, the program on screen is what is showing on 58-1. When I go to 58-3 the channel banner displays the program that should be on 58-3, but, the program on screen is what is showing on 58-2. The program guide is correct as to what the programming should be. It seems that the live programming is out of sequence. I have two other hd receivers in the house and neither receiver has this problem. I have plugged the HD Tivo receiver into a location that is working properly and I continue to get the same problem. I have also taken one of my other receivers and hooked it up in the Great Room and it works fine. Directv sent me a new HD Tivo and it has the same problem as the original. Any thoughts would be appreciated.