Separate names with a comma.
That's correct. I was referring to the Hopper going into standby mode, not actually physically removing power. Now that we've used the Hopper...
My mistake. The screen shows 5 tuners with 1 Hopper and 1 Super Joey.
When I press the button on the Hopper remote that shows tuners, should my Super Joey tuners also show here? Only the Hopper tuners are showing on...
Thanks TommyF, your explanation helped a little but sometimes the Hopper still comes out of standby or power-off with channel 103 or 104 tuned....
Thanks! I double checked my remote and it does have a learning function.
Has anyone been able to program their remote to control AppleTV (current version). Even with programming a TV Accessory, AppleTV is not listed.
Our Hopper always powers up to channel 104. This is an annoying infomercial channel which I would really like to change but I can't find a way of...
I picked up a 4-way satellite signal splitter at Walmart and it worked fine. I was a little concerned about signal strength from the splitter to...
Is there a way to have a Hopper remote control send IR Hopper commands to a learning IR remote control? From what I can tell, the remote will only...
What is the frequency range of the splitter for the Joeys? 15-2150 Mhz? Power passing? Thanks.
I gave DTV one my try, and yet another retention rep said she could order me the newer equipment. I questioned her at length about her ability to...
A Dish retailer installed our system last week and all went very well. When the tech came out I first explained the 2 coax requirement and I...
HoTat2, James, Zulu, Wow! Thank you much for your help and designing the system for me. It's nice to know there are 2 solutions to the problem. I...
Thanks Zulu. I posted my last post at the same time or just after you posted this post, so I didn't see your post. So the additional 3 Joeys would...
Thanks everyone for your suggestions. With the Super Joey connected via an Integrator, I'm not seeing how only 2 cables running into the house...
Thanks James. Does this mean that for my configuration of 5 rooms that a minimum of 3 coax cables will have to enter the house from the dish? The...
I called DTV to double check cancellation policy, my existing credits, billing cycle, etc. I made it very clear I was planning on cancelling and I...
That's great news! For awhile I was thinking that 5 wired locations would not be possible. Even if the installer wouldn't do it, I imagine I could...
Thanks again Stewart. You're correct in that we have distributed wiring with (2) RG-6 cables from each room homed to a central equipment room and...
Thanks Stewart, that was a huge help. So if I got this right: Hopper: (1) cable run from the duo node outside to the Hopper (through the wiring...
Advertisements
