Separate names with a comma.
unplugged it for three hours - no joy
311 must be as squirrely. It Failed a check switch telling me I lost a SAT.
The only two receivers NOT giving me headaches are my 301 and 510....
ECHO 5 is crippled
'' EchoStar V
* Operator: EchoStar
* Manufacturer: Space Systems/Loral
* Model: FS 1300
* Launched: 23...
OK I'll try it when the wife goes to sleep and gives me "control"
Any one have a info on this version?
Seem to have lost the 129W signal for some reason on the 811 ONLY. Also seem to have lost 129W from the...
95 uses LINEAR KU band 11.7-12.2
Troubleshooting the multiswitch
STACKER Distribution can cut down on cable runs if you are not afraid of $$$$
No Multiswitches LOCK the inputs from the LNB's or upstream Multiswitches to specific values. In this case each of the 4 input lines will be...
Here's your diagram
This is the diagram of the Phase 3 Dish with the Internal MultiSwitch.
You can receive any of the 3 SATS from each of the 4 outputs.
You are close. What you have drawn IS what is going on inside of the Phase 3 Multiswitch that is installed in the ARM.
All 4 outputs of the Phase...
If your mounting installation is not exactly "PLUMB" you will have problems lining up all 3 SATS its that simple?