1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2 RF Remotes on same Receiver?

Discussion in 'DIRECTV General Discussion' started by RonH, Feb 23, 2009.

  1. RonH

    RonH Godfather

    316
    0
    Jul 25, 2007
    I have my Bedroom TV and DirecTv receiver running with the RC64R remote in RF mode. I want to add a 2nd RC64R remote to run the same receiver but have it also control my Hot Tub TV(On/Off,Vol.). Can this be done?

    Thanks
     
  2. BGreen965

    BGreen965 Legend

    103
    0
    Aug 12, 2007
    Yes- Just make sure to program both remotes to the same receiver code and they will work just fine. The receiver doesn't talk back to the remote so there is no reason why 2 or 12 wouldn't work.
     
  3. veryoldschool

    veryoldschool Lifetime Achiever Staff Member Super Moderator DBSTalk Club

    42,684
    349
    Dec 9, 2006
    Sure.
    Take the second remote and:
    1. dtv
    2. press and hold MUTE & SELECT for two blinks
    3. enter 0 0 0 0 1
    4. press and hold MUTE & SELECT for two blinks
    5. enter 9 6 1
    6. press CH UP
    7. enter the last 6 digits of the receivers ID #, found on a sticker in the access card comparment
    8. press SELECT
    [courtesy of Edmund]
     
  4. Newshawk

    Newshawk Hall Of Fame

    2,441
    0
    Sep 3, 2004
    Broken...
    I've done this for at least six months. I connected a RF modulator to a HR20-100 and ran a coax cable to the OTA in of the D10-300 in the bedroom. This way, all you have to do is turn off the D10 and the HR20 is visible on the bedroom TV. My wife uses it to watch recordings of programs she's missed (she's been pretty much bedridden for the last 6-8 months.)

    What's funny is that I origianlly bought the RC64RB just for the backlight feature. We now use it more for the RF capability.

    This is how it works:

    The H20-100's original remote (a RC34) is set to run the DVR (in RF mode) and a Sanyo TV in the computer room (spare bedroom.)
    The D10-300's replacement RC64RB remote is set on DirecTV mode to operate the D10-300 (IR) and the master bedroom Curtis Mathes TV. It is also set to operate the HR20-100 on AV1 in RF mode while still controlling the TV.

    hope this helps.
     
  5. RonH

    RonH Godfather

    316
    0
    Jul 25, 2007
    Thanks guys,worked like charm.
     
  6. bearcat250

    bearcat250 Legend

    232
    1
    Feb 19, 2004
    I performed this function just this weekend & it worked fine. Bought a RC64RB at Circuit City for $24. Programmed it to an HR21-100 as a second remote.
     

Share This Page