DBSTalk Forum banner

DirecTV/TiVo Peanut Remote ?

6K views 50 replies 9 participants last post by  Laxguy 
#1 ·
I am trying to program the Black DirecTV/TiVo Peanut Remote: for the dvrhd34 Genie do I need codes could someone tell me the set up
 
#2 ·
The Genie uses the HR2x IR code sets (as does the THR22).

If you have the THR22 and the Genie in the same room, you must change the IR code set on one or the other.

Note that both the THR22 and Genie can use IR and RF remotes interchangeably.
 
#4 ·
It's in the menu tree somewhere, I'm sorry I'm not at the device but if you go into the setup screens and look for Remote Control...
 
#6 ·
Does your peanut remote have red/green/blue/yellow buttons (A/B/C/D) on it? What model TiVo did it come from? If it did not come with a THR22, then it won't control a HR34. If it did come with a THR22, then it will control an HR34 without doing anything, but your THR22 will respond to the same codes. You can follow the on-screen instructions on the THR22 to change the remote code set it understands.
 
#17 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top