Element ELEFW328 Remote Code

Discussion in 'DIRECTV Tips and Resources' started by Hulksta, Dec 29, 2014.

  1. Hulksta

    Hulksta New Member

    2
    0
    Dec 29, 2014
    California
    I can't seem to find a good code for my element LCD Tv...I am using a RC64R Remote...HELP!!!!!before I throw it out the window!!!
     
  2. peds48

    peds48 Genius.

    20,073
    1,071
    Jan 10, 2008
    NY
    If you were unable to find the code for your brand of TV or component, you can try a code search. This process may take up to 30 minutes.

    1. Turn on the TV or component.

    2. Slide the MODE switch to the TV, AV1 or AV2 position, as desired.

    3. Press and hold the MUTE and SELECT keys at the same time until the green light under the selected switch position flashes twice, then release both keys.

    4. Enter 9-9-1 followed by 1

    5. Press VOL UP

    6. Point the remote at the TV or component and press CHAN. Repeatedly press CHAN until the TV or component VOL raises or performs the action you selected in step 5.

    NOTE: Every time CHANis pressed the remote advances to the next code and power is transmitted to the component.
    
    7. Use the CHAN key to step back a code.

    8. When the TV or component turns off turns off or
    performs the action you selected in step 5, stop pressing the CHANkey. Then, press and release the SELECT key.

    NOTE: If the light flashes 3 times before the TV or com- ponent responds, you've cycled through all
    codes and the code you need is not available. You must use the remote that came with your TV or component.
     
  3. Hulksta

    Hulksta New Member

    2
    0
    Dec 29, 2014
    California
    Thanks...I'll give it a try
     
  4. jimmie57

    jimmie57 Hall Of Fame

    9,534
    726
    Jun 26, 2010
    Texas City, TX
    There are some more codes available that might work if you had an RC66 remote.
    They are cheap on Ebay. I have bought 2 or 3 of them.

    Link to codes: http://www.directv.com/DTVAPP/content/remote_codes
    Choose the model, then type in the brand, then try that one, then choose more codes and try those.
     
  5. jrwinter

    jrwinter AllStar

    88
    0
    Sep 2, 2004
    try
    10835* it worked on my element tv
     
  6. Dec 3, 2018 #6 of 10
    BestLey

    BestLey New Member

    2
    0
    Dec 3, 2018
    Has anyone found a remote code for a RC73 Genie remote that works for the Element TV- or a different TV brand to use to program to HR54
     
  7. Dec 3, 2018 #7 of 10
    jimmie57

    jimmie57 Hall Of Fame

    9,534
    726
    Jun 26, 2010
    Texas City, TX
    Have you tried this link ?
    Remote Control Code Lookup
     
  8. Dec 3, 2018 #8 of 10
    BestLey

    BestLey New Member

    2
    0
    Dec 3, 2018
    This remote doesn’t have the slider at the top but yes I tried the steps besides the sliding and didn’t find one. Tried it for an hr.
     
  9. Dec 3, 2018 #9 of 10
    studechip

    studechip Godfather

    1,740
    125
    Apr 16, 2012
    Did you try 10178?
     
  10. jimmie57

    jimmie57 Hall Of Fame

    9,534
    726
    Jun 26, 2010
    Texas City, TX
    Try 11886 for Element TVs.
    Yes, the slider is gone. All TV codes start with a 1, Audio is a 2 or 3. Because they are set up in this manner the slider is not needed on the new remotes.
     

Share This Page

spam firewall