1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  1. glorybe25705

    glorybe25705 AllStar

    Jan 28, 2010
    im hooking up reciver,r22 in garage and have a dish on roof,i used dishpointer but cant seem to get signal also cant get to guided setup either when i first start goes straight to signal strength. its a 3 lnb dish i live in area code 25705
  2. Scott Kocourek

    Scott Kocourek Well-Known Member

    Jun 13, 2009
    I am going to move this to the installation forum. I think you are better off asking there.
  3. veryoldschool

    veryoldschool Lifetime Achiever Staff Member Super Moderator DBSTalk Club

    Dec 9, 2006
    Which "3 LNB" dish?
    The phase III or the SL3?
    The phase III centers on 110, while the SL3 centers on 101.

    Press and hold the info button on the remote, should get you into the menu.
  4. jdspencer

    jdspencer Hall Of Fame

    Nov 7, 2003
    Once you determine which dish you have, make sure the mast is plumb and that the skew/tilt is set according to your location. Then set the elevation. Now you can aim it in azimuth, moving it slowly to allow the receiver or meter lock on.

Share This Page