Here's my problem. I live in an apartment and didn't bother to make sure my porch faces the direction of the satty for DTV. My porch is the only place I can put a dish... they will not let us install it on the side of the building or on top... nor run any wires over the building or around. I DID get authorization to put my dish on a tripod on the porch of their model apartment on the other side of the building which DOES face the satty... but I have no way to get a coax to that side of the building. There is no physical solution by wire. Is there a product out there that will take signal off of a COAX Cable and transmit it to a receiver, then output back to a coax connection? I'm not talking those cheap composite 2.4 ghz wireless transmitters that you can get at rat shack... those modulate the signal into a composite form and is strictly for AFTER your receiver has decrypted the signal into left/right audio channels and video. I need something that will take the RAW UNENCRYPTED signal from the dish... down the coax, into a transmitter... to a receiver... back onto a coax, and then into my satellite in connection on my Direct TV receiver... Someone HAS to make this product. I find it IMPOSSIBLE that no one has had the issue of wanting to send their coax signal from one place to another without wires. Please help! Thank you in advance.