1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Remote Codes

Discussion in 'DIRECTV HD DVR/Receiver Discussion' started by PWenger, Jun 20, 2007.

Thread Status:
Not open for further replies.
  1. PWenger

    PWenger Legend

    155
    0
    Jan 24, 2003
    I have a 42" Polaroid LCD set attached to my HR20. When I look up the remote codes, it says 14 codes available, but it only lists 6, then ..., implying there are more. However, under that are the instructions, and I can't figure out how to get the other codes to appear.

    Of course, the visible codes don't work. Can anyone tell me how to access the other codes, or does anyone know what all the codes are so I can try the ones listed toward the end?

    Thanks for the help.
     
  2. dhelmet78

    dhelmet78 Mentor

    46
    0
    Mar 30, 2007
    Yes, I have noticed the same thing with several brands. It says XX are available, yet only shows 5, and the last one on the screen is cut off by 2 digits making it useless. How do you make it show the remaining codes? I haven't figured it out.
     
  3. puffnstuff

    puffnstuff Icon

    749
    0
    Sep 2, 2006
    I believe this is a known bug as it is still doing it in the current ce release .
     
  4. Edmund

    Edmund Remote Master

    1,785
    13
    Apr 17, 2003
    Southern Ca
    No need, the codes aren't in any released remote yet. Only the upcoming rc64 series of remotes.
     
  5. RobertE

    RobertE New Member

    8,024
    0
    Jun 9, 2006
    The listed codes for the RC32/34 remote are:

    10765
    10865
    11262
    11276
    11314
    11316
    11326
    11327
    11328
    11341
     
  6. PWenger

    PWenger Legend

    155
    0
    Jan 24, 2003
    Just claryifying...do you mean that the latter codes wouldn't work in my remote anyway, they are for a "coming soon" remote that doesn't exist yet? So if I can't get the remote to work with the first group of codes, I am out of luck?
     
  7. PWenger

    PWenger Legend

    155
    0
    Jan 24, 2003
    Thanks RobertE...I think you helped me when I had my H10 on this tv. Very appreciated.
     
  8. Edmund

    Edmund Remote Master

    1,785
    13
    Apr 17, 2003
    Southern Ca
    Yes, but you may not be out of luck. try the following codes, mitsubishi tv codes, and codes 10463 & 11656.
     
  9. Dave_S

    Dave_S DBSTalk Club Member

    144
    0
    Jan 6, 2006
    Anyone have the newer Panasonic TV codes? None of the older ones work, and I can't see all of the new ones.
     
  10. Edmund

    Edmund Remote Master

    1,785
    13
    Apr 17, 2003
    Southern Ca

    You can have them but they're useless in your current remotes:

    10047, 10156, 10051, 10060, 10178, 10030, 11926, 11919, 11347, 10747, 10309, 10149, 10138, 10135, 10110, 10039, 10032, 10027, 10021, 10019, 10018, 10003, 10002.
     
  11. lwilli201

    lwilli201 Hall Of Fame

    3,189
    28
    Dec 22, 2006
    Missouri
    Hi Edmund

    While on the subject of remote codes. I read your post from a while back about the remote codes the Sceptre TV's. I have the Sceptre X37. All the codes I have tried only work the Power, Mute, and Channel Change. I can not get the sound to work. Tried the 9-9-3 but that did not work. Do you have any updated information on this matter. I have a new RC32 remote. I have used Sony codes and the codes shown in the HR20 remote setup. They all act the same.

    Any help would be greatly appreciated.
     
  12. finaldiet

    finaldiet Hall Of Fame

    1,158
    0
    Jun 13, 2006
    I have a Vizio tv and have not been able to get remote to work right. I use the ON button whenever I turn tv on or off. The receiver stays on all the time. I followed instructions and used every code receiver has for Vizio. My sony turns tv and receiver off with on/off button. Doesn't matter to me if receiver is on or off when done watching tv. Thanks for any help.
     
  13. Edmund

    Edmund Remote Master

    1,785
    13
    Apr 17, 2003
    Southern Ca

    Try code 10056.
     
  14. Dave_S

    Dave_S DBSTalk Club Member

    144
    0
    Jan 6, 2006
    Edmund,
    Thanks for the reply. When do you think we will be able to get the new rc64 remote, or a remote that will work with these codes?
     
  15. finaldiet

    finaldiet Hall Of Fame

    1,158
    0
    Jun 13, 2006
    The code does not work. Tried vizio codes again, but no luck. Guess I'll have to stick with what I have. Thanks for your help.
     
  16. RobertE

    RobertE New Member

    8,024
    0
    Jun 9, 2006
    I'm guessing you have tried:
    10864
    10885
    11756
     
  17. finaldiet

    finaldiet Hall Of Fame

    1,158
    0
    Jun 13, 2006
    I have tried
    10864,10885,11499,11756,11758 and the one Edmund gave me: 10056

    Nothing has worked.
     
  18. mtnagel

    mtnagel Hall Of Fame

    2,019
    0
    Sep 18, 2006
    Does anyone (Edmund :)) have Yamaha stereo codes?
     
  19. RobertE

    RobertE New Member

    8,024
    0
    Jun 9, 2006
    Two different groups listed in the RC32 book.

    Audio Amps/Tuners

    30176
    30186
    31176
    31276
    31331
    31375

    Audio Amps

    30354
    30133
    30143

    Good luck. :)
     
  20. mtnagel

    mtnagel Hall Of Fame

    2,019
    0
    Sep 18, 2006
    Thanks for the help, but they didn't work. I'm really surprised because the receiver isn't that old. It is used, but not that old.
     
Thread Status:
Not open for further replies.

Share This Page