1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Remote Setup... Stereo Volume while In DirecTV mode?

Discussion in 'DIRECTV General Discussion' started by Earl Bonovich, Aug 4, 2006.

Thread Status:
Not open for further replies.
  1. Earl Bonovich

    Earl Bonovich Lifetime Achiever

    30,092
    3
    Nov 15, 2005
    Okay.... I need your guys help...

    My TV and my Stereo are available for the remote.

    How do I setup my remote, so that while I am in DirecTV Mode:
    Volume up and down / mute; is for the AMP

    And TV Power is for the TV....
     
  2. telecaster

    telecaster Cool Member

    25
    0
    May 23, 2005
    Assumming you have one of the RC remotes.
    From the manual]

    To Lock Volume to AV1, AV2 or TV
    1. Move the slide switch to the AV1, AV2 or TV position to
    lock the volume.
    2. Press and hold the MUTE and SELECT keys until the green
    light under the selected switch flashes twice and release
    both keys.
    3. Using the number keys, enter 9-9-3 (the green light will
    flash twice).
    4. Press and release the SELECT key (the green light will
    flash twice).
     
  3. Edmund

    Edmund Remote Master

    1,785
    13
    Apr 17, 2003
    Southern Ca
    1. av1 or av2
    2. press and hold MUTE & SELECT for two blinks
    3. enter 9-9-3
    4. press SELECT

    To restore the TV vol in just the TV device:

    1. Tv
    2. press and hold MUTE & SELECT for two blinks
    3. enter 9-9-3
    4. press VOL DOWN
     
  4. Bajanjack

    Bajanjack Icon

    683
    0
    Oct 22, 2006
    sorry for not sounding to bright, but I followed your instructions....when the remote is in directv mode the volume is not adjusting my amp.........I have the rc34 remote........

    Edit to the above...I reentered info & it worked!!.............thanks much
     
  5. Edmund

    Edmund Remote Master

    1,785
    13
    Apr 17, 2003
    Southern Ca
    if it doesn't work, the problem maybe you don't have a TV code programmed to the TV device, your brand or any, or the vol keys won't work.
     
  6. dervari

    dervari Icon

    777
    0
    Dec 1, 2005
    That worked for me, finally! Would have been nice if they let you know that.

    Thanks!
     
  7. blade

    blade AllStar

    59
    0
    Sep 20, 2006
    It is buried in the book that came with the box, and I think the directions in it even were a little wrong when I read them (either for the 11 or R15) and one had them correct so I figured it out. I still wish there was a way that when I power off it would turn off my Receiver/Amp (like my old digital cable remote would). Currently it will turn off the tv and box but then i have to slide over and separately turn off the AMP. Anyone know of a fix for this?
     
Thread Status:
Not open for further replies.

Share This Page