1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Setup/Installation Question

Discussion in 'DIRECTV Installation/MDU Discussion' started by tirwin1, Aug 24, 2008.

  1. tirwin1

    tirwin1 New Member

    4
    0
    Aug 24, 2008
    I am going to order Direct TV this week and was curious about the setup and my existing home theater configuration. I currently don't have cable. Instead, I have an antenna on my roof that is connected to dvd recorder. The DVD recorder and a HD DVD player are both connected to a Denon receiver. I have one HDMI cable going from the Denon receiver to my 60" TV. This allows me to use the Denon receiver to coordinate the signal to the TV.

    How will the Direct TV install work? Does anyone have an setup similar to this, or any recommendations? Any thoughts would be greatly appreciated.

    Tim
     
  2. spartanstew

    spartanstew Dry as a bone

    12,566
    61
    Nov 16, 2005
    Wylie, Texas
    I would imagine they'll just ignore that setup.

    Your AV receiver has HDMI switching?

    If so, they'll just install the dish and D* receiver like normal and then connect the D* receiver to the AV receiver via HDMI.

    If your TV has more than 1 HDMI input they may just hook the D* receiver directly to the TV via HDMI, but you could always switch it later if that's the case.
     
  3. BattleZone

    BattleZone Hall Of Fame

    8,969
    1
    Nov 13, 2007
    Most installers are not trained on (or paid to integrate to) AV receivers, and will want to connect the receiver directly to the TV.

    If the customer is very familiar with their equipment and how to use it, many installers will work with the customer and the AV receiver, as long as it doesn't hold up the process (the installer's time is limited). Generally, if it looks like hooking things into the AV receiver is going to confuse the customer, the tech won't do it, because if the customer complains to DirecTV that, for example, they "can't get sound", the tech can get a charge-back and have to go back for a free service call.
     

Share This Page