DBSTalk Forum banner
wally
1-7 of 7 Results
  1. General DISH™ Discussion
    As previously posted, I have two Dish VIP211 receivers. I have Dish’s biggest programming package. Would I be able to swap out the 211 receivers for two Wally receivers? I’ll appreciate your input. Thanks.
  2. General DISH™ Discussion
    I am trying to use a Wally to connect to a DishPro Plus 129 Triple LNB Integrated LNBF 1000 with a built in DP34 Multi Switch connected to another DPP44 Multi Switch in the middle (See wire diagram attached). In doing some research I found that in order to use the Wally I needed the DPP44 as I...
  3. ViP211(411)/211K/222 Support Forum
    There are a number of subscribers reporting that the Wally single tuner receiver connected to a HD and DVR account are able to record 2 SATELLITE channels simultaneously. I know it can do an OTA channel and a satellite channel but these folks are saying that it is now "magically" able to record...
  4. DISH™ High Definition Discussion
    I operate a number of ViP211k, ViP211z, and Wally receivers off of a single Western Arc DPP 1000.2 dish. 3 lines from the dish feed to a DPP44, then to a DP34, then another DP34. Let's call the outputs of those 1-12. Output 1 from the DPP44 is being powered with the power inserter. This setup...
  5. General DISH™ Discussion
    I have a DISH 1000.2 Hybrid West Arc LNBF and trying to connect two Wally receivers. This antenna has three ports (Port 1, Port 2 and LNB in). I tried connecting one receiver to port 1 and the other to port 2 but the wally fails the installation (I assume the check switch test) on port 2. The...
  6. DISH™ OTA Support and Discussion Forum
    I have a brand new 2018 Coachmen Concord and it came with a Wally receiver, King Tailgater satellite antenna, and a King Jack OTA antenna, without an auto signal finder. My question is: Are these the devices I can purchase for an RV? I want to increase my chances of great OTA, satellite and...
  7. General DISH™ Discussion
    For a camper that runs on 12v, I am wondering if I can find a diagram of the power supply inside so I can avoid using an inverter & connect the DC power inside the receiver directly to the campers 12v batteries. (I'm obviously assuming it uses 12v power, it may use less or more, but that's still...
1-7 of 7 Results
Top