DBSTalk Forum banner
Status
Not open for further replies.
1 - 6 of 6 Posts

· Cool Member
Joined
·
25 Posts
Discussion Starter · #1 ·
DirecTV is trying to get me to switch to HR20/HR10 STBs from my four HR10-250's, one SD Samsung SD Tivo, and two SD non-Tivo STBs. I currently use all 12 coax feeds from my 12 port Spaun Multiswitch (with a UHF antenna diplexed to the feeds) to feed my seven DirecTV STBs. Is there a way to do this with the Ku/Ka dish and new DirectV receivers? This might have been asked before but I could not find an answer.
 

· DBSTalk Club Member
Joined
·
1,135 Posts
FTM has nothing to do with OTA diplexing. As far as diplexing with the KA/KU dish,
it is still up the air but there are some threads explaining that you have to diplex
in AFTER the B-Band converter, but since nothing is using that frequency yet, it is
hard to determine if that solution is viable.
 

· Lifetime Achiever
Joined
·
30,090 Posts
Once FTM is available... you will want to have TWO cables.
One for the FTM-SAT signal, the others for an OTA
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top