DBSTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Super Moderator
Joined
·
12,876 Posts
The main problem with cascading WB68's is that they are non-powered and when cascaded, you typically don't get enough power through two layers of multiswitch to the dish.

It is also possible to parallel two WB68's using dual power passing splitters, and that may work better than cascading them.

Carl
 

·
Super Moderator
Joined
·
12,876 Posts
You will have all signals available on the 4 open ports on the WB68. You will only have 101, 110 and 119 (but NOT 99 and 103) available on the outputs of your powered 4x8. So feed your H20 and/or HR20 units from the WB68 and all of your non MPEG4 equipment from the powered 4x8.

Carl
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top