[geminidpr]

I'm getting 168 volts at 2sk3520 but no voltage after the x-former. I replaced a bloated 1000mf at 10volts in the secondary and thought the unit would fire up but it didn't. Any help would be appreciated. Thanx.

 

[geminidpr]

A schematic diagram of the power supply will help. Thanx.

 

[boba]

Should have swapped the receiver through DISH before you tore into it. Now you could try searching on ebay for a nonworking "for parts only" leased receiver that is being sold cheaply. Use that as a source of parts until you find the actual bad parts that you need.

 

[P Smith]

Or just get a grasp a concept of switching supply and you'll be 'independent' of particular implementation.

 

[geminidpr]

I replaced the 2sk3520 and it fired up. Thanx 4 ur help guys.

 

[P Smith]

MOSFET. What was its position of silk screen ?