DBSTalk Forum banner
1 - 9 of 9 Posts

· New Member
Joined
·
4 Posts
Discussion Starter · #1 ·
Hey Ya'll...

I have a 942 Dish HD DVR. It "freezes" intermittently. I have spent LOTS of time on the phone with CSR's, 3 tech visits, and it's still not working. Here's what we've done:

1) Unplugged the unit from the phone line
2) Put a ground plug on the unit's power cord.
3) Replaced the unit ( the replacement did the same thing)
4) Replaced the LNB (tech said mine had basically melted in the heat, that would probably clear it up....it didn't)

Today, I have reset my unit 12 TIMES since 1pm (it's 6:45pm now). Naturally, since I have an agreement until April of 2007, they won't let me cancel without a hefty payment. They also won't upgrade me to another unit without paying a couple hundred bucks.

I'm at wit's end. Has anyone else had this problem, and if they have, how the hell did you fix it?

Thanks,

Kenny-Tulsa, OK
 

· Godfather
Joined
·
300 Posts
I had the same issues with the vip622 DVR. I took someone's advice and placed a cooling mat that is for a laptop and it has solved my problems for the time being. I've only done this for half a day but I've had no freezes or power outages.

Prior to using the cooling mat I had 8 to 10 failures in 2 days. It might be too soon to say the mat solves everything but its worth a try.


 

· New Member
Joined
·
3 Posts
kenwall said:
Thanks guys. They're sending me a 622. I was getting a mat for my laptop, so i'll get two!

Thanks,

Ken
Ken- I have been having the same problem for a year. I had four 942's shipped to me in 12 months and all reset while watching/rcoding NBC5 KXAS.

After the third 942 I threatened to call the atty general if they did not replace their obviously defective equipment-still no go unless I give them 200 bux...

So how did you get a 622 out of them ?

Thanks,
Daryle
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top