DBSTalk Forum banner
1 - 7 of 7 Posts

· Godfather
Joined
·
300 Posts
Discussion Starter · #1 ·
I installed a new surge protector yesterday and now both of my AM21 do not work. The guide is populated with the local stations and gives a error code of 792 searching for signal on the off-air anrenna. Any ideas?
 

· The Shadow Knows!
Joined
·
36,634 Posts
I'm not familiar with a 792. Maybe redo the satellite and antenna setup?
 

· Legend
Joined
·
177 Posts
sat4r said:
thanks for the reply Stuart , still nothing at all,the guide is populated still shows searching for signal on off-air antenna.
Your antenna amp wasn't going thru the surge protector before right? I accidentally unplugged my small antenna amp and got 792 as well. Just a thought.
 

· Legend
Joined
·
177 Posts
Stuart Sweet said:
I'm not familiar with a 792. Maybe redo the satellite and antenna setup?
792 is to OTA what 771 is to the D* Dish. It's a signal loss on the OTA.
 

· Godfather
Joined
·
300 Posts
Discussion Starter · #7 ·
Problem is corrected,when I took down my C-BAND there was a cable in the attic that I accidently took out the same time that I installed the surge protector. It has so many years that this was connected and now fixed. Thanks for all your inputs.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top