While watching live TV:
Remote commands are ignored or the response is very slow. If a show is paused for a significant length of time, and then the user resumes watching and FFs through commercials, the progress bar at the bottom remains on the screen indicating FF even if Play is resumed. The blue lights continue to circle around long after Play has resumed. Pausing may result in total locking up.
While watching a recorded program:
Same slowness in response to remote commands. Plus, locking up is very common.
Using guide:
Pressing guide results in a primarily black screen with the blue banner across the top and and empty black box where the current channel should be displayed.
Pressing Record:
Orange light does not come on. May or may not actually record. This can be determined by pausing for a few seconds, then pressing Play and looking at the progress bar to see if the recorded portion is in the buffer (blue) or on the harddrive (red).
Changing channels while in the guide:
Scrolling up and down is very tedious and slow.
Audio and Video:
Frequent audio dropouts of a very short duration coupled with part of screen freezing and getting out of phase but we are not seing any pixelation as we did when the first box crapped out. It only crapped out on MPEG2 channels. (There were no MPEG4 at the time).
Signal strength is fine - nothing under 90 on all the different transponders except for the ones that it does not matter (I have a list somewhere that a CSR gave me to check).
We replaced the batteries in the remote, checked all the connections. Unit has an external cabinet fan with internal air temperature monitoring and the average temp is under 100 degrees inside the cabinet. Surface of case is pretty hot, but it has always been hot. Internal temp reported in Info is WNL.
Remote commands are ignored or the response is very slow. If a show is paused for a significant length of time, and then the user resumes watching and FFs through commercials, the progress bar at the bottom remains on the screen indicating FF even if Play is resumed. The blue lights continue to circle around long after Play has resumed. Pausing may result in total locking up.
While watching a recorded program:
Same slowness in response to remote commands. Plus, locking up is very common.
Using guide:
Pressing guide results in a primarily black screen with the blue banner across the top and and empty black box where the current channel should be displayed.
Pressing Record:
Orange light does not come on. May or may not actually record. This can be determined by pausing for a few seconds, then pressing Play and looking at the progress bar to see if the recorded portion is in the buffer (blue) or on the harddrive (red).
Changing channels while in the guide:
Scrolling up and down is very tedious and slow.
Audio and Video:
Frequent audio dropouts of a very short duration coupled with part of screen freezing and getting out of phase but we are not seing any pixelation as we did when the first box crapped out. It only crapped out on MPEG2 channels. (There were no MPEG4 at the time).
Signal strength is fine - nothing under 90 on all the different transponders except for the ones that it does not matter (I have a list somewhere that a CSR gave me to check).
We replaced the batteries in the remote, checked all the connections. Unit has an external cabinet fan with internal air temperature monitoring and the average temp is under 100 degrees inside the cabinet. Surface of case is pretty hot, but it has always been hot. Internal temp reported in Info is WNL.
Michael D'Angelo;1681074 said:
