[elexcollins]

Need help, I want to use my Mitsubishi as second receiver, menu only have up to
three lnb settings ,if I use three setting I don't get all channels, if I use 2 lnb setting will not get HD channels, any suggestions on how to configure this
Elex Collins

 

[Newshawk]

The three LNB setting should do it. What channels are you missing? If it's your locals in HD, then that's normal-the Mitsu is not MPEG4 capable. If its other channels, we'd need to know which ones are missing to be able to figure out what may be wrong.

 

[litzdog911]

What channels are you missing with the "3-LNB" setting? Your Mitsubishi cannot use the new Ka-band MPEG4 channels anyway, so "3-LNB" should be the correct setting for this receiver.

 

[elexcollins]

In 200's getting 26 channels, missing about 11, getting about 13 300's and getting all 500's except 504, getting all HD channels.it seems I am not getting
channels from sat 101
Elex Collins

 

[litzdog911]

What do you see when you check the signal readings on the various satellites and transponders? Also, check the test channels (490, 491, 492, 493 and 494) and let us know what you see.