DBSTalk Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
8,024 Posts
Incog-Neato said:
Anyone know what the windload spec is on the AU9 slimline?
While not specific to the AU9, you could get a rough idea using the DIU configuration.

Download here: http://www.ssi-iraq.com/software.html

Ignore the com port warning at startup.

Go to Utils -> Ballast

That will open up the ballast app from Hughes. Everything from there is pretty straight forward.

Hope that helps.
 

·
AllStar
Joined
·
86 Posts
wind tunnel tested to 120 mph thats what D* ops mgr told us techs here is la yesterday he was getting feedback on how the slimlines held up in the hurricane and was taking down suggestions for improvements.
 

·
Legend
Joined
·
124 Posts
RobertE said:
While not specific to the AU9, you could get a rough idea using the DIU configuration.

Download here: http://www.ssi-iraq.com/software.html

Ignore the com port warning at startup.

Go to Utils -> Ballast

That will open up the ballast app from Hughes. Everything from there is pretty straight forward.

Hope that helps.
A nice program, If your putting a non-pen mount on a roof. And need to know how much ballast you needed . But it won't tell you wind load spec on a AU9.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top