DBSTalk Forum banner
1 - 8 of 8 Posts

·
New Member
Joined
·
3 Posts
Discussion Starter · #1 ·
Was planning on hooking up an additional HD DVR in same room. Question is...
If i put one remote on RF and the other on IR will they still intefere with each other when changing channels.

Thank you for your help
Bob
 

·
Registered
Joined
·
4,290 Posts
Bob2008 said:
Was planning on hooking up an additional HD DVR in same room. Question is...
If i put one remote on RF and the other on IR will they still intefere with each other when changing channels.

Thank you for your help
Bob
I have 2 HR DVRs in my Living Room. I run one with a remote in IR mode and one with a remote in RF mode. They don't interfere with each other in the slightest.

Larry
 

·
Legend
Joined
·
180 Posts
Same here. I recently had to change remotes and now have to run two IR's. I have one set up to run on the Directv mode, and the other one set up to run on AV1.
I liked having two remotes seperately before, but this way seems to be working out fine.
 

·
Legend
Joined
·
374 Posts
I have 2 HR20-100s (one on top of the other) both running IR since I use one universal remote (MX-850) to run everything (DVRs, plasma TV, appletv, DVD, sound processor, etc). There is info on this if you search but if I remember correctly the first code is 00001 and the second 00003 for the HR20-100. The link mentioned above was helpful but also see:
http://www.dbstalk.com/showthread.php?t=108130
http://www.tivocommunity.com/tivo-vb/showthread.php?t=382843
see this for HR20 codes:
http://www.remotecentral.com/cgi-bin/search/search.cgi?Terms=hr20&Match=1
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top