DBSTalk Forum banner
Status
Not open for further replies.
1 - 10 of 10 Posts

· Legend
Joined
·
200 Posts
Discussion Starter · #1 ·
So here is my dilema - I have an antenna - regular old one - high up on our roof. I think the rotor is bad, but it is aimed roughly where I want it. Would have to hire someone to check it.
So I am wondering if I were to add a HD antenna somewhere, facing towards my other major market, if that signal could be combined with the first one?
Thanks,
Dave
 

· Legend
Joined
·
148 Posts
Depending on how close you are to your combined markets and general signal strenght a multi directional antenna may get everything without having to rotate for each channel.
You said you think the rotor is broken what do you do fore the different channels now?
Are there some you just don't get.

I got a multi rom radio Shack for $50 - hung it myself so no extra charge there.
 

· Legend
Joined
·
200 Posts
Discussion Starter · #5 ·
dwenn said:
Depending on how close you are to your combined markets and general signal strenght a multi directional antenna may get everything without having to rotate for each channel.
You said you think the rotor is broken what do you do fore the different channels now?
Are there some you just don't get.

I got a multi rom radio Shack for $50 - hung it myself so no extra charge there.
Well I get all MY locals (Sacto/Stockton) via OTA or SAT, but I WANT MORE!!:lol: :lol:
Especially Fresno channels since games that might be blacked out in my other two markets are sometimes available from Fresno.
ANd when the antenna rotor worked, I did get Bay Area and Fresno channels quite well by rotating.
 

· Impossible Dreamer
Joined
·
5,525 Posts
PoplarBranch said:
Just go to Radio Shack and pick up a Splitter/Combiner for about $15.
To combine you connect the antennas to the 'output' connectors and connect the cable that goes to your HR20/TV to the 'input' side.
Ken
That's always worth a try, but it often doesn't work well or at all, and can make reception worse.

I had to use a Jointenna to combine my two antennas (I have one channel 140 degrees away from the rest of 'em).
 

· Cool Member
Joined
·
15 Posts
deebeeeff said:
So here is my dilema - I have an antenna - regular old one - high up on our roof. I think the rotor is bad, but it is aimed roughly where I want it. Would have to hire someone to check it.
So I am wondering if I were to add a HD antenna somewhere, facing towards my other major market, if that signal could be combined with the first one?
Thanks,
Dave
What is an 'HD Antenna'? OTA is UHF, the last time I checked. Do you not have a UHF antenna on your regular old one?

If it's just an old VHF antenna, it will probably be just as much trouble to hang a UHF and combiner up there as it would be to pull the old one down and replace it with one that does both.

IMHO...
 

· Legend
Joined
·
200 Posts
Discussion Starter · #8 ·
Flores said:
What is an 'HD Antenna'? OTA is UHF, the last time I checked. Do you not have a UHF antenna on your regular old one?

If it's just an old VHF antenna, it will probably be just as much trouble to hang a UHF and combiner up there as it would be to pull the old one down and replace it with one that does both.

IMHO...
Good point about "HD Antenna".
yeah the roof antenna is uhf/vhf; gets good reception of HD channels in the direction it is aimed, which is about halfway between two markets.
where I live antennas need to be really high up
 

· Registered
Joined
·
12,615 Posts
I used to live in Stockton, so I know what you're dealing with. An antenna combiner like the ChannelMaster Jointenna *might* work, and you certainly won't hurt anything by giving it a try. But don't expect too much. Trying to combine similar frequences (Fresno and Sacramento's UHF frequencies) with antennas aimed 180-deg apart usually doesn't work too well
 
1 - 10 of 10 Posts
Status
Not open for further replies.
Top