DBSTalk Forum banner

Comments I received from Zinwell about cascading a power passing splitters

745 Views 5 Replies 4 Participants Last post by  employee3
I was talking with someone in email from Zinwell about their WB68 switches and how to best connect them for people who need more than 8 outputs.

Basically a guy there named Jason said that there is no reliable way to cascade or use power passing splitters with the WB68. He said for more than 8 you "need" the WB616.

Here is what he said about cascading them.

"If you doing the cascading, you will have the power consumption problem. So, this will not work for the WB 68."

And here is what he said about the power passing splitters.

"If you are using power passing splitter to extend 16 outputs, you will loss the signal for the 22kHz inputs. That's mean you not be able to receive some channal from SAT 110 or SAT 119."

I should note that I passed him that sample picture of the powered splitters connect directly to the lines from the AT9 and then each splitters output going to the 4 inputs on each WB68. So his above comment is in reference to that PDF sample mentioned on various topics on here.

This info may have already been posted, but I figured I would post the comments from the Zinwell guy.
Not open for further replies.
1 - 2 of 6 Posts
Of course this is what he said... he's trying to sell the 16 port versions, which are pretty $$$. You can get the 8-port for $20 on eBay.

There are plenty of people on the board who have this working correctly, including myself. Search for the diagram.
belboz said:
If you read my post I mentioned I sent him the diagram.
BFD. So you sent the diagram that all of us use and he said it doesn't work. Even though he probably didn't try it himself. This is a crap thread considering we have PROOF IT DOES WORK.

So what's the point of your post?

Just because a lot of people thought the Earth was flat didn't make it so.
1 - 2 of 6 Posts
Not open for further replies.