DBSTalk Forum banner
Status
Not open for further replies.

Connecting Wallys to house mounted Dish?

2K views 3 replies 4 participants last post by  scooper 
#1 ·
I have a RV with two Wallys installed when traveling, but when I am home the RV mounted dish has no to clear line of sight to the open sky. I currently have a ~200ft run of Quad shielded RG6 going from my house to the RV.

Looking at the connection in my attic can I attach to the client connection on the hub at the house or do I need a different model?

Hand Finger Gas Nail Electric blue
 
See less See more
1
#2 ·
The Client connection is intended for connecting Joeys, not a dish or receiver. To ODU would go to your dish, To Host would go to a Hopper 3 on the Hub pictured.

Adding the Wallys to the home dish is not likely to be possible. Most likely you have a Hybrid LNB on the dish with a single cable leading to the Hub pictured. You would need to replace that LNB with a regular Dish Pro Plus LNB and add a DPH42 switch between the new LNB and the hub. The second output from the DPH42 could then be fed to the RV.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top