delete programs in the middle
1 - 14 of 14 Posts
I have had my HR34 for only 4 days now, but it is my understanding there are some bugs still being worked out with the HR34, but it is getting better with each update. Hopefully your problem was only a one time thing. I have seen a few small things with my HR34 in the 4 days I have had it that I had never seen with my HR24 but no big problems.
Hopefully someone that has had the HR34 longer than I have will answer your question.
Hopefully someone that has had the HR34 longer than I have will answer your question.
Joined
·
12,615 Posts
This can be a symptom of weak or intermittent satellite reception. How are your signal readings?
Joined
·
4,572 Posts
Was it really the middle of the recording or just the middle of the show? In other words, did your DVR record the whole thing? I bet it asked if you wanted to delete because for some reason it stopped recording in the middle of the show.
Joined
·
12,615 Posts
What about the other satellites?lacubs said:
No, that won't ruin the hard drive.
Please post back with your signal readings for each satellite's transponders (and both tuners if applicable). You'll find these readings under "Menu" -> "Setup" -> "System Setup" -> Satellite -> "View Signal Strength". Note the "+" and "-" symbols next to the "Satellite" and "Tuner" entries where you can toggle the readings between the various satellites and both DVR tuners.
Fill in your readings for each satellite and tuner using these examples. A properly aligned dish will show 80-90s on most of the relevant transponders (although some will be low or zero):
Satellite transponders (32 total at 101º)
[Most of your standard definition channels are beamed from 101ºW]
1-8 x x x x x x x x
9-16 x x x x x x x x
17-24 x x x x x x x x
25-32 x x x x x x x x
Satellite transponders (3 total at 110º)
[Not present with Slimline3 dish. No channels are currently beamed from this satellite]
1-8 NA NA NA NA NA NA NA x
9-16 NA x NA x NA NA NA NA
Satellite transponders (11 total at 119º)
[Not present with Slimline 3 dish. Local SD channels for some cities, Spanish package]
17-24 NA NA NA NA NA x x x
25-32 x x x x x x x x
Satellite transponders (16 total at 99º(s)) [or 99º(b)]
[Local HD channels for some cities]
1-8 x x x x x x NA NA
9-16 NA NA NA NA NA NA x x
17-24 x x x x x x x x
[Note: these can be very slow to appear]
Satellite transponders (14 total at 99º(c)) [or 99º(a)]
[National HD channels]
1-8 x x x x x x x x
9-16 x x x x x x NA NA
[Note, these can be very slow to appear]
Satellite transponders (16 total at 103º(s)) [or 103º(a)]
[Local HD channels for some cities]
1-8 x x x x x x NA NA
9-16 NA NA NA NA NA NA x x
17-24 x x x x x x x x
[Note, these can be very slow to appear]
Satellite transponders (16 total at 103º(ca))
[National HD channels beamed from D12 satellite]
1-8 NA NA NA NA NA NA NA NA
9-16 x x x x x x x x
17-24 x x x x x x x x
Satellite transponders (14 total at 103º(cb)) [or 103º(b)]
[National HD channels beamed from D10 satellite]
1-8 x x x x x x x x
9-16 x x x x x x NA NA
17-24 NA NA NA NA NA NA NA NA
Satellite transponders (9 total at SWM)
[You'll only see this if you have a Single Wire Multiswitch (SWM) dish]
1-8 x x x x x x x x
9-16 x NA NA NA NA NA NA NA
Joined
·
783 Posts
satellite 99clitzdog911 said:
1-8 99-95-90-88-94-92-88-88
9-16 93-94-88-88-94-95-na-na
17-24 rest are N/A
satellite 99s
1-8 53-77-49-69-0-91-na-na
9-16 na-na-na-na-na--0-0
17-24 95-94-0-0-52-33-0-0
satellite 103s
1-8 31-11-12-0-0-na-na
9-16 na-na-na-na-na-na-72-0
17-24 93-89-0-0-92-95-74-73
satellite 103ca
1-8 all na
9-16 86-95-92-95-93-95-93-93
94-95-95-95-95-95-96-97
17-24 rest are N/A
satellite 103cb
1-8 97-95-88-92-93-89
9-16 95-92-92-89-95-na-na
17-24 rest are N/A
satellite swm
1-8 100-100-100-100-100-97-97
9-16 97-rest are N/A
17-24 rest are N/A
Joined
·
783 Posts
every time i play something that does this its do samething, and got to delete them, even programs i recorded like 2 months ago it doing the samething, right now it fine except for some recording getting ask to be delete in middle of programs, the guide in find mine do-to-list is loading findLaxguy said:
Joined
·
10,062 Posts
I did not see that anyone mentioned a reset of the receiver to see if that would fix it. It fixes lots of irritation things.
Menu, Settings, Reset, choose the first one on the list to reset the receiver.
The second one changes some of your settings .
The third choice erases all settings and deletes any recordings you have.
Menu, Settings, Reset, choose the first one on the list to reset the receiver.
The second one changes some of your settings .
The third choice erases all settings and deletes any recordings you have.
Joined
·
10,062 Posts
I put those last 2 so you would know not to choose those.lacubs said:
They would be a last resort if all else failed.
Even doing the extreme one does not say it would fix it.
Example of settings would be the choices for Native on or off, resolutions, favorite channels, etc.
I always do a reset after new software is installed, the same as I do with my PCs.
1 - 14 of 14 Posts
