DBSTalk Forum banner
1 - 6 of 6 Posts

· Cool Member
Joined
·
21 Posts
Discussion Starter · #1 ·
I have grown tired of my condo building not acting to install an HD compatible solution in the building (right now only have access to the 101 slot). I am going to purchase my own dish, mount it, and run the cable into my unit. To keep it as minimal as possible, I would like a dish that is SWM compatible, only having one wire from the dish to the power inserter in my unit. Is there a dish on the market that can do this (if so, where?), and is there a distance limit on how far the power inserter can be from the dish?

Thanks for the help. I have a HR20-700 if that makes a difference.
 

· Registered
Joined
·
8,671 Posts
think the swmline (5lnb with SWM built in) will be availible very soon.. this would be your best bet.. I have run mine with over 100' PI>dish
 

· Cool Member
Joined
·
21 Posts
Discussion Starter · #5 ·
Thanks for the replies, I will wait for the SWMline to come out (timeline?). We only have access to 101 because the equipment in the building is so old. Clear line of sight to the birds. I was going to mount on the roof of the building and drop the coax down to my unit. Most elegant, not really, but maybe having coax on the side of the building will get the board to act.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top