DBSTalk Forum banner
1 - 8 of 8 Posts

· New Member
Joined
·
6 Posts
Discussion Starter · #1 ·
I have a DP721 and DP508. Just installed a DP Quad LNB to eliminate a SW64 that had a couple of corroded ports.

The DP508 recognized the DP Quad right away and is working fine.

I cleared the Switch Matrix and then re-ran the switch test

The DP721 switch test shows

Port 1 2
Sat 110 x
Trans x x
Dev n/a n/a

Satellite Input 1 status: reception verified
Switch: No Switch

----------------------------------

Port 1 2
Sat 119 x
Trans x x
Dev n/a n/a

Satellite Input 2 status: reception verified
Switch: No Switch

I've replaced the existing cables with RG-6/QS and 2.4GHz grounding blocks
I also tried switching ports on the DP Quad, the DP508 works fine on any port but the DP721 won't work at all.


Any suggestions?

Thanks
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top