DBSTalk Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· AllStar
Joined
·
56 Posts
This feature was the sole reason for my upgrade. I have the HR-20 installed in the theater room closet (with the rest of the theater gear) It feeds Component out to the AV receiver (which does component switching) and then to an Infocus In76 projector. I have the output set to "native", as I've found that the upconversion chip in the Infocus does a better job than the HR-20. Audio is fed to the receiver via optical out.

I also have the s-video and L/R audio connected to a $20 RF modulator from Wal Mart. It feeds the signal into the house coax, serving up the signal to the other TVs on channel 4.

Everything works perfectly.

I am curious though, for those of you using the Channel Vision device (which I know nothing about) will it accept a 720p component in, feeding it out 480i? I'd like to find a way to feed my Xbox 360 to the other TVs, since I have the wireless controllers, but I haven't found a way to do it without unplugging the component cables from the receiver.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top