DBSTalk Forum banner
1 - 20 of 36 Posts

·
Registered
Joined
·
3,957 Posts
Discussion Starter · #1 ·
I need a hard drive controller for my computer, but really have no idea about them, so I'm looking for a suggestion. It should connect via PCI-E, and have 7 SATA 6bps connections on it. I'll be connecting an SSD boot drive, a Blu-Ray burner, DVD burner, and 4 mechanical drives. I need everything to run at full speed. RAID is NOT required.
If it matters any, I'm running 64 bit Windows 7 Ultimate.
 

·
Registered
Joined
·
3,957 Posts
Discussion Starter · #3 ·
P Smith said:
If I got the 6 port card you mentioned, would I be able to transfer files back and forth between drives connected to the controller card, and my SSD drive connected to my motherboard? That's one of the limitations of my current motherboard-the 6Gbps SATA drives can't communicate with the 3Gbps SATA drives.
 

·
Mr. FixAnything
Joined
·
27,448 Posts
kevinturcotte said:
If I got the 6 port card you mentioned, would I be able to transfer files back and forth between drives connected to the controller card, and my SSD drive connected to my motherboard? That's one of the limitations of my current motherboard-the 6Gbps SATA drives can't communicate with the 3Gbps SATA drives.
Oh ! If it's a bug - you should replace the motherboard.
Actually, you did something wrong - hard drives cannot communicates - only programs could (via CPU,RAM,DMA,SATA controllers) do that.
 

·
Registered
Joined
·
3,957 Posts
Discussion Starter · #5 ·
P Smith said:
Oh ! If it's a bug - you should replace the motherboard.
Actually, you did something wrong - hard drives cannot communicates - only programs could (via CPU,RAM,DMA,SATA controllers) do that.
No, I've talked to Asus, it's not a bug, just the way they designed it. I discovered it when I went to use Wipre my hard drive using Boot N Nuke. DVD drive on the 6Gbps connector couldn't communicate with the hard drive on the 3Gbps connector. I talked to Asus, and that's the way they designed it. Had to do some major swapping around after that.
 

·
Mr. FixAnything
Joined
·
27,448 Posts
kevinturcotte said:
No, I've talked to Asus, it's not a bug, just the way they designed it. I discovered it when I went to use Wipre my hard drive using Boot N Nuke. DVD drive on the 6Gbps connector couldn't communicate with the hard drive on the 3Gbps connector. I talked to Asus, and that's the way they designed it. Had to do some major swapping around after that.
Sounds like someone is try fool you.
PC has many different channels to communicate with drives: IDE, SATA, SCSI, floppy interface, USB, firewire, etc - all devices working together.
And again - the communication goes by programs via CPU,RAM,DMA, etc.

If you transcript or FAQ or Q&A from Asus about the mobo, post it here - your description of some problem is not correct for sure.
 

·
Registered
Joined
·
3,957 Posts
Discussion Starter · #7 ·
P Smith said:
Sounds like someone is try fool you.
PC has many different channels to communicate with drives: IDE, SATA, SCSI, floppy interface, USB, firewire, etc - all devices working together.
And again - the communication goes by programs via CPU,RAM,DMA, etc.

If you transcript or FAQ or Q&A from Asus about the mobo, post it here - your description of some problem is not correct for sure.
It's out of warranty now anyway. I could upgrade, but kinda waiting for Ivy Bridge and Z77 boards.
If I could somehow get those 2 other connecters to communicate with the others, I wouldn't even need a controller card.
 

·
Mr. FixAnything
Joined
·
27,448 Posts
I don't see anything what could be such issue:
Intel ICH10R controller
6 xSATA 3.0 Gb/s ports
Intel Matrix Storage Technology Support RAID 0,1,5,10
Marvell® PCIe SATA 6Gb/s controller*
- 2 x SATA 6.0 Gb/s ports
* These SATA ports are for data hard drives only. ATAPI devices are not supported.
 

·
Godfather
Joined
·
433 Posts
the likely cause is that the disc you booted in your DVD drive did not have drivers for the sata 6g ports controller chip. I have run into that with some usb3 controllers... Requires new boot disc, not controller...
 

·
Legend
Joined
·
256 Posts
kevinturcotte said:
No, I've talked to Asus, it's not a bug, just the way they designed it. I discovered it when I went to use Wipre my hard drive using Boot N Nuke. DVD drive on the 6Gbps connector couldn't communicate with the hard drive on the 3Gbps connector. I talked to Asus, and that's the way they designed it. Had to do some major swapping around after that.
I've never even heard of a set-up like that. I think that whoever you talked to was blowing smoke up your you-know-what. No one in their right mind would purposely design a motherboard like that. If your mother board is working like that then it's a design flaw and Asus is just refusing to admit that they screwed up. Every hard drive and optical drive should see each other and be able to transfer files back & forth from each other regardless of how they are connected.
 

·
Legend
Joined
·
256 Posts
P Smith said:
Oh ! If it's a bug - you should replace the motherboard.
Actually, you did something wrong - hard drives cannot communicates - only programs could (via CPU,RAM,DMA,SATA controllers) do that.
?????????
If that's true than how was I able to back up files to blank DVD's last night? How is it I am able to copy backed up files from optical discs I've burned to new hard drives?
 

·
Registered
Joined
·
3,957 Posts
Discussion Starter · #14 ·
Red Orc said:
I've never even heard of a set-up like that. I think that whoever you talked to was blowing smoke up your you-know-what. No one in their right mind would purposely design a motherboard like that. If your mother board is working like that then it's a design flaw and Asus is just refusing to admit that they screwed up. Every hard drive and optical drive should see each other and be able to transfer files back & forth from each other regardless of how they are connected.
I don't know, maybe. Seems like a horrible design flaw to me too. Course, if it's just a flaky board, and they replaced it, I'd just get some refurb garbage with who knows what else wrong with it. I'm hoping I have the money to upgrade to Ivy Bridge, which would obviously bring a new motherboard with it. I need the additional storage NOW though.
 

·
Legend
Joined
·
256 Posts
BAHitman said:
the likely cause is that the disc you booted in your DVD drive did not have drivers for the sata 6g ports controller chip. I have run into that with some usb3 controllers... Requires new boot disc, not controller...
The motherboard should have come with a disc that contained all of the drivers needed. If he lost it he can go to Asus' web site & download them. He should go any way & see if there have been any updated drivers released. A missing or outdated driver can cause all kinds of problems.
 

·
Registered
Joined
·
3,957 Posts
Discussion Starter · #17 ·
Red Orc said:
The motherboard should have come with a disc that contained all of the drivers needed. If he lost it he can go to Asus' web site & download them. He should go any way & see if there have been any updated drivers released. A missing or outdated driver can cause all kinds of problems.
I have updated the BIOS to the latest version. This is what they offer: http://usa.asus.com/Motherboards/Intel_Socket_1366/P6X58D_Premium/#download What would I want?
 

·
Icon
Joined
·
669 Posts
Check out the 3Ware / LSI Controllers I've been using them for years and they are great reliable performers. I use their Caching RAID Controllers which are a little more money but to me worth every penny. www.3ware.com
 

·
Mr. FixAnything
Joined
·
27,448 Posts
Red Orc said:
?????????
If that's true than how was I able to back up files to blank DVD's last night? How is it I am able to copy backed up files from optical discs I've burned to new hard drives?
Don't bother with deepening HW-SW relations if your PC is working OK.

It's just came from OP controversial description of unknown problem.
 

·
Large Member
Joined
·
4,867 Posts
Red Orc said:
?????????
If that's true than how was I able to back up files to blank DVD's last night? How is it I am able to copy backed up files from optical discs I've burned to new hard drives?
+1

I have an Asus P8Z68 with 9 SATA ports from 3 vendors on the board (Intell, jMicron & Marvell) running 2 SATA DVD-R/W, 2 SATA SSD on 6GBPS (raid 0) ports and 3 mechanical hard drives and everything sees and reads/writes to everything fine.

The OP's board is a couple gens old (P6), maybe they screwed something up on it although it doesn't make any sense. Some of the mixed vendor SATA ports on the older boards had to be configured in a strange way to work with the other ports IIRC.
 
1 - 20 of 36 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top