DBSTalk Forum banner
1 - 2 of 2 Posts

·
1*
Joined
·
10,289 Posts
Do you have a SWM setup (one coax to each receiver)? If so, power down each of the receivers and unplug them, unplug the SWM PI for a minute or so, plug the SWM back in and after powered up, plug back in each receiver. If Tuner 2 still doesn't work, you probably have a bad LNB.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top