hooking 3 joeys to one hopper

1540 Views 2 Replies 3 Participants Last post by Ray [email protected] Network, Jun 15, 2012

How/Rad

Discussion Starter · Jun 15, 2012

I want to hook my 3 joeys to one of my 1st hopper so I can watch my dVRed programs from one hopper on all tvs, but I only have 1 node with 3 in from satelitte, 2 to host and 2 to client, and another node like thing that has on node one host and one client, If i put a splitter 2 ghz from my hopper to the 1st host on the node and the host on the other node like thing will i then be able to have all my joeys hooked to that on hopper

Save

1 - 3 of 3 Posts

P Smith

· #2 · Jun 15, 2012

There are diagrams at EKB - follow them.

Save

Ray [email protected] Network

· #3 · Jun 15, 2012

This link provides information about installing the Hoppers and Joeys. Look at your Node to determine if it is a Duo or Solo Node. Look for the drawing that uses the type Node you have.

http://www.satelliteguys.us/hopper-zone/277416-hopper-installation-training-materials.html

The other link in the post provides information about the Hopper and Joey, too. If you have further questions, please let me know. Thanks.

How/Rad said:
I want to hook my 3 joeys to one of my 1st hopper so I can watch my dVRed programs from one hopper on all tvs, but I only have 1 node with 3 in from satelitte, 2 to host and 2 to client, and another node like thing that has on node one host and one client, If i put a splitter 2 ghz from my hopper to the 1st host on the node and the host on the other node like thing will i then be able to have all my joeys hooked to that on hopper

Save

1 - 3 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month