Hopper - S216 or S217/Joey S268 Software Experiences/Bugs

15349 Views 87 Replies 20 Participants Last post by P Smith, Aug 11, 2012

3HaloODST

Discussion Starter · Jul 20, 2012

Got S216 tonight. RIP S215. Available Joey software is S268. Haven't checked the Joeys or other Hoppers yet.

EDIT: Hard drive percentage used went down, granted I never use PTAT so I guess it gave me the space that PTAT would normally occupy. Space available on the internal drive is up to 1231 GB from 1000.

EDIT2: All 3 Hoppers are on S216 and 2 Joeys are on S268. Had to re enable bridging on 1 Hopper to get Internet connectivity on the other 2 Hoppers and 1 MoCA Joey, plus it re enabled the wireless Joey's ability to link with the MoCA Hoppers.

So far so good, all Hoppers and Joeys can see each other. On S213, I had lots of issues with receivers randomly unable to see each other after the nightly update until I did a red button reboot. Disabling bridging on the MoCA-only Hoppers didn't even help. Hopefully that won't be the case anymore. I certainly never had problems with that on S212.

I am also very happy to see that my recordings that previously said "You are not subscribed" are now restored and work fine!

So S216 is a winner in my book!

1 - 20 of 88 Posts

James Long

· #2 · Jul 20, 2012

I too received 216/268 last night (at 2:43AM ET).

oldengineer

· #3 · Jul 20, 2012

Got them this morning. HD setup now says 1080p/1080i. I think this is new.

BTW how do I view the disk capacity

Ray [email protected] Network

· #4 · Jul 20, 2012

You can find the disk capacity in the Recordings Transfer settings. If you have further questions, please let me know. Thanks.

oldengineer said:
Got them this morning. HD setup now says 1080p/1080i. I think this is new.

BTW how do I view the disk capacity

syphix

· #5 · Jul 20, 2012

How do you get S216 on ALL of your hoppers (and S268 on your Joeys), yet NONE of mine have updated past S213??

Unfair!!

strikes2k

· #6 · Jul 20, 2012

syphix said:
How do you get S216 on ALL of your hoppers (and S268 on your Joeys), yet NONE of mine have updated past S213??

Unfair!!

Dunno. I didn't get 215/267 but last night we got 216/268.

treecastle

· #7 · Jul 20, 2012

I received S2.16/S2.68 last night as well. I skipped over S2.15/S2.67 as well. Looks good so far.

StringFellow

· #8 · Jul 21, 2012

"syphix" said:
How do you get S216 on ALL of your hoppers (and S268 on your Joeys), yet NONE of mine have updated past S213??

Unfair!!

Join the club. Still 213 here too

dunkonu23

· #9 · Jul 21, 2012

S215 7/20/2012 2:50AM
Joey's at 268.

NO problems so far.

Scott

crabtrp

· #10 · Jul 21, 2012

s217 now! We are getting a new update each day. Auto hop works on hopper to hopper PTAT

3HaloODST

Discussion Starter · #11 · Jul 21, 2012

crabtrp said:
s217 now! We are getting a new update each day. Auto hop works on hopper to hopper PTAT

Wow same here!

sregener

· #12 · Jul 21, 2012

S217 - 30-second skip is still slow.

oldengineer

· #13 · Jul 21, 2012

217 on both Hoppers this morning. Joeys still at 268.

bigdog9586

· #14 · Jul 21, 2012

oldengineer said:
217 on both Hoppers this morning. Joeys still at 268.

Same here.

treecastle

· #15 · Jul 21, 2012

My Hopper is now on S217 too, but the Joeys are still S268

3HaloODST

Discussion Starter · #16 · Jul 21, 2012

Yep Hoppers are at 217 Joeys are at 268 Hoppers show available Joey software as 268.

StringFellow

· #17 · Jul 21, 2012

Received 2.17 this morning as well. Didn't have to reset any bridge settings as others have mentioned. Maybe that is the reason for 2.17?

bigdog9586

· #18 · Jul 21, 2012

sregener said:
S217 - 30-second skip is still slow.

I think it's worse. On old softwareI could push the skip button 8 times real fast and move a head 4 min. On 213 you could still do it pretty relieablely but picture was frozen. Now on 217 picture still frozen but pushing 8 times gets me if I'm lucky maybe 5 pushes work.

Ray [email protected] Network

· #19 · Jul 21, 2012

I'm showing S2.68 is the current software version for the Joey. Thanks.

oldengineer said:
217 on both Hoppers this morning. Joeys still at 268.

patmurphey

· #20 · Jul 21, 2012

Hey, Ray is 217 going to disable bridging in a Hopper where it was manually re-enabled in 216?

1 - 20 of 88 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.