DBSTalk Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
No. You need a DPP LNB and a DPH42 switch (a relatively expensive combination).
No…
You do need a DPP LNB, as the Wally would need port 1 on a hybrid and will disable the other ports.
The correct setup without needing a 42 Switch is to run two lines from the DPP LNB to a solo node for the Hopper, and one line directly to the Wally. (Preferably with a ground block). Wally’s don’t disable DPP ports, and can be used on any. Solo nodes can support any Hopper except a Hopper 3.
 
1 - 1 of 1 Posts
Top