DBSTalk Forum banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Hall Of Fame
Joined
·
1,339 Posts
My experience is that you're only going to be able to move SD, this way -- in case you're hoping for HD, as well. Been using this since I got my HR10 to move signal to the bedroom TV -- since the HR10 didn't have a coax out.

And don't repeat my really dumb mistake -- where I frustrated myself into thinking I had a bad RF unit out of the box -- be certain your output is set to 480i before you try to check the feed to your other TV's.

I forgot to do that and went through all sorts of attempts [Radio Shack version] before I simply started all over again. That particular unit wouldn't even turn on unless it had 480i input.

Of course, now that I'm saying this -- I wonder if you can get a modulator w/component in -- and move HD that way? The HR10 wouldn't allow both HDMI and component on at the same time.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top