[heelie]

From everything I've been able to read, the HR 22-100 supports 3D, but I cannot locate the channels in the loww 100's, can someone confirm if this model does indeed support 3D

heelie

 

[Kevin F]

It does support 3D. Your tv must also be a 3D model as well. Try rebooting the receiver to see if that works.

Kevin F

 

[RAD]

They are 103 through 107. Do you use a favorites list and need to add them?

 

[dpeters11]

Also assuming you don't have one of the older DLP 3D sets that used checkerboard 3D. Though I think there were adapters for some of them.

Disregard if you have a plasma or LCD panel

 

[heelie]

Thx guys. Have the 3DTV, channels just do not appear on the guide. Any chance it could be in the set up ? As far as rebooting goes, what is the best method ?

heelie

 

[dpeters11]

How is your guide setup? All, channels I get or custom? Also, is your tv connected directly to the DVR or going through an AVR? Using HDMI?

Not sure if these would cause the channels not to show n the guide, but could cause issues overall.

Rebooting through the setup menu is always the best way.

 

[RAD]

Even the TV can't do 3D the channels will show in the guide, but just grayed out.

 

[dpeters11]

Thanks RAD. Couldn't check myself, my wife would kill me for playing with it during the game.

 

[heelie]

Thx again, won't be able to wrestle the remote away from the family till Mike & Molly are over. However, channel set up is: hide SD dupicates, will try all channels later.

heelie

 

[dpeters11]

You'd want to go into the guide, and hit the yellow button and check your setup there.

 

[heelie]

Currently do not have the 3D TV hooked up to receiver. Rebooted receiver, no 3D in guide, but if I key in a 3D channel, note comes up that this TV is not3D capable . Dumb question, does a 3D tv have to be connected in order for the 3D channels to show up on guide ? which seems odd.

thx, heelie

 

[RAD]

Currently do not have the 3D TV hooked up to receiver. Rebooted receiver, no 3D in guide, but if I key in a 3D channel, note comes up that this TV is not3D capable . Dumb question, does a 3D tv have to be connected in order for the 3D channels to show up on guide ? which seems odd.

thx, heelie

No, if you have the guide set to all channels you will see them in the guide but they are grayed out. You can even record them, you'll just get a warning message about not being able to view but say record anyway.

 

[dpeters11]

Hmm, I just looked. My 3D channels on my HR34 only show up when I select all channels, and are grayed out. I have a 3D compatible set (just don't have glasses), 3D compatible receiver and using HDMI.

But I do think its normal for them to not show up as available unless everything is compatible.

 

[heelie]

Working, finally had time today to re-hook up 3D TV. Everything is fine, 3D channels show in guide, working good. I still find it odd that the guide will not load the 3D channels unless connected to a 3D TV. Anyhow, it is what it is.
Thx
heelie

 

[codespy]

Working, finally had time today to re-hook up 3D TV. Everything is fine, 3D channels show in guide, working good. I still find it odd that the guide will not load the 3D channels unless connected to a 3D TV. Anyhow, it is what it is.
Thx
heelie

Had you not got them working, I would have suggested that perhaps DirecTV 3D channels are not available over the border in Ontario. !rolling

 

[MysteryMan]

Had you not got them working, I would have suggested that perhaps DirecTV 3D channels are not available over the border in Ontario. !rolling

It pays to read the fine print. :lol: