DBSTalk Forum banner
1 - 6 of 6 Posts

· AllStar
Joined
·
92 Posts
Discussion Starter · #1 ·
Last Saturday I installed, and activated my new R22-100 as a replacement for
my R15-500. When the installers originally installed the R15 in my den they
also ran a seperate cable to my bedroom which would only mirror what was
playing on the R15, this does not work with the R22.
They used a diplexer, and splitter.

I now need to figure out how to get a signal to the tv in the bedroom.

Any easy ways to do it? I don't need to control the channels, just be able to watch what is playing from the bedroom.
I would really appreciate any recommendations.

Thanks,

Bill
 

· Super Moderator
Joined
·
12,438 Posts
Easily obtained at Radio Shack, Best Buy, Circuit City, etc. Typically cost $15 to $25. Connect composite video (yellow/red/white) out from the R22 to the inputs of the modulator, and the coax output of the modulator to the feed to the other room.

Carl
 

· AllStar
Joined
·
92 Posts
Discussion Starter · #5 ·
carl6 said:
Easily obtained at Radio Shack, Best Buy, Circuit City, etc. Typically cost $15 to $25. Connect composite video (yellow/red/white) out from the R22 to the inputs of the modulator, and the coax output of the modulator to the feed to the other room.

Carl
Thanks Carl, I have been wondering how you would go about hooking up the
composite to the coax. Guess I had better make a run to Radio Shack today,
Best Buy and Circuit City are all at least 50 miles away. :)
 

· AllStar
Joined
·
92 Posts
Discussion Starter · #6 ·
carl6 said:
Easily obtained at Radio Shack, Best Buy, Circuit City, etc. Typically cost $15 to $25. Connect composite video (yellow/red/white) out from the R22 to the inputs of the modulator, and the coax output of the modulator to the feed to the other room.

Carl
Thanks again Carl, got RF modulator at Wal-Mart, hooked it up in about
5 minutes and it worked like a dream :hurah: I can now watch a little
tele in the BR, whilst getting ready ready to turn in.
RF Mod: well worth the $ 19.62

Thanks again :)
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top