DBSTalk Forum banner
Status
Not open for further replies.
1 - 9 of 9 Posts

· Cool Member
Joined
·
21 Posts
Discussion Starter · #1 ·
I've had my R15 for less than a week now, and I'm not surprised that this morning, it wouldn't turn on.

The reset button did nothing, so I cycled power.

That seemed to do it.

As expected my guide was empty.

Although still listed in my prioritizer, my recurring manual recordings were no longer in the todo list.

I guess the honeymoon is over.
 

· Godfather
Joined
·
267 Posts
Give it time. When the DVR is reset, the guide is cleared and has to be repopulated. It will happen over several hours. This procedure is not the same as a reformat which also clears any programming you're recorded. You should still have those.
 

· Super Moderator
Joined
·
12,438 Posts
When you say "recurring manual recordings" are you referring to recordings you selected in the guide by pressing R one time rather than twice (for a series link)? Or are you referring to going into the menu structure and selecting a manual recording, and entering a time and channel?

If the former, they will reappear as soon as the guide data rebuilds itself. If the latter, I think they should still be there.

Carl
 

· Cool Member
Joined
·
21 Posts
Discussion Starter · #5 ·
Going into the menu structure and selecting a manual recording, and entering a time and channel.

BTW, the unit (while playing from MyVOD) just went to Powering Up...

I don't think I lost anything except the guide.

I'm totally disgusted with the software in R15. It's worse than anything I've ever shipped as Beta. It takes nerve to ship something like this.
 

· Hall Of Fame
Joined
·
2,496 Posts
Could have some bad hardware or a bad PS in it. Have you tried unplugging it and completely resetting it? I haven't seen anyone here say that the software has been causing reboots like that. At least that I recall, to me it sounds more like a hardware problem.
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top