DBSTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Legend
Joined
·
136 Posts
Discussion Starter · #1 ·
I have an AT9 that needs to be mounted on the West side of my house (it is the only place that can see all the sats). Now, it looks like I can't mount it anywhere but the south side unless I get the mast above the roof line. I mean, I think the AT9 dish is too wide to mount on a west wall and turn 90* to the south. Am I wrong or does the standard mast bring the dish far enough from the wall to turn it 90*. It looks like you only have about 45* of play because the mast is too close to the wall.
 

·
Legend
Joined
·
136 Posts
Discussion Starter · #3 ·
As far as I can tell, the mast would have to project out 16" to be able to turn the dish sideways. The mast only gets it out 11"

Kinda dumb mast design. You should be able to rotate the dish around 360* for most flexibility. The way they design this thing, you can only mount it on a south wall or on a north/west/east soffit. But not a north/west/east wall.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top