DBSTalk Forum banner

Movers Connection question

737 Views 4 Replies 4 Participants Last post by  Kapeman
I currently have an MRV/SWM setup and may be moving.

I assume if I use the Movers Connection program they will setup the same in the new house with no charges for the SWM gear. Is that correct?

I know that I could be charged for any extra wire pulls, etc.

How much does that typically run?

The new house is wired with COAX and I assume DTV can just use the existing wiring (I hope).

I also plan on using cable for Internet access and need to be able to split out that one cable from the DTV install.

Am I missing anything?

Thanks!

I am a long-time/good standing customer if that comes into play.
1 - 1 of 5 Posts
Kapeman said:
I currently have an MRV/SWM setup and may be moving.

I assume if I use the Movers Connection program they will setup the same in the new house with no charges for the SWM gear. Is that correct?

I know that I could be charged for any extra wire pulls, etc.

How much does that typically run?


The new house is wired with COAX and I assume DTV can just use the existing wiring (I hope).

I also plan on using cable for Internet access and need to be able to split out that one cable from the DTV install.

Am I missing anything?

Thanks!

I am a long-time/good standing customer if that comes into play.
I did my own wiring, but the installer told me when he came out to hook things up that they charge $50 per drop for interior walls, but they won't fish down through exterior walls (like I did) at all. Pricing may be different for other locations/types of construction, though.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top