DBSTalk Forum banner
Status
Not open for further replies.
1 - 14 of 14 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have Dish network with several tvs in different rooms. The main room already has a Harmony remote control which works great with my complicated system. I have another TV in a different room with DVD player that I would like to also use a Harmony. I understand that the Dish receiver uses IR for my main setup and that any additional rooms will communicate with that receiver through RF. Question, can I use a second Harmony remote to communicate with the Dish receiver using RF? Any google searches have left me more confused as I am reading that they Dish is a special exception to the RF rule for Harmony remotes. Any support before purchasing another remote would be helpful.
 

·
Registered
Joined
·
1,318 Posts
ixoyewarrior said:
My receiver says it is a ViP722k DVR. I know it is not a hopper or Joey.
A 722K uses IR for TV1 but uses UHF for TV2 Harmony doesn't use the same UHF frequency that the FCC has assigned to DISH for their RF remotes. Harmony should be usable with TV1. TV1 may have to be on remote address #1 to be compatible with Harmony. Remote for TV2 blue tab at bottom of remote is a universal remote and may be programmed to operate other components. If it is a 21.x UHF remote it has LEARNING capabilities so you can program it to operate your other components.
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #5 ·
Just so I understand what you are saying. I am unable to use a Harmony remote on TV2, just TV1. I already have TV1 setup and working great with Harmony. TV two is also working but would prefer to use a second Harmony remote. I am aware that the Dish 21.x is a learning remote but I have young children that are confused at simple steps such as:

Watch DVD - turn on tv, change tv input to hdmi 1, turn on dvd player
Watch netflix - turn on tv, change tv input to hdmi 1, turn on dvd player, start netflix
Watch dish- turn on tv, change input to tv, turn on dish network
etc.

Is there any workaround or options
 

·
Beware the Attack Basset
Joined
·
24,645 Posts
ixoyewarrior said:
Question, can I use a second Harmony remote to communicate with the Dish receiver using RF?
Harmony remotes generally do NOT support direct RF control of devices (be it DISH or any other hardware provider). Harmony has some RF remotes that communicate with a base station that sends out IR signals.

If the second room isn't all that "complicated", you may be able to use a DISH RF remote to control the satellite receiver, TV and DVD player.

I suspect the reason you aren't finding anything is that you're asking from the DISH angle and the issue is really a Harmony question.
 

·
Beware the Attack Basset
Joined
·
24,645 Posts
n0qcu said:
DISH has (or had) an IR to UHF converter for TV2. I do not remember the part number.
The appropriate term is "had" and the device converted TV2 control from RF to IR.

I actually saw a TV2 IR converter for sale at my local DISH dealer last week.
 

·
Beware the Attack Basset
Joined
·
24,645 Posts
RBA said:
Using a Google search I found Dishdepot has 9 on ebay at $49.99 so it seems they are still available
Officially, they are discontinued.
 

·
Registered
Joined
·
1,318 Posts
harsh said:
Officially, they are discontinued.
I thought they were also but as long as Dishdepot has them on ebay they are still available. I suspect when DISH introduced them in 2009 they thought there was more of a market than what actually developed. This is probably what is left of Dishdepots 2009 purchase.
 
1 - 14 of 14 Posts
Status
Not open for further replies.
Top