DBSTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Hall Of Fame
Joined
·
2,010 Posts
The 622 runs very hot all by itself. Placing it on top of another component would not be a good thing to do. Nor would placing anything on top of the 622. If it just started when you moved its location, my guess is a heat problem.

If the reboots continue after moving it back to its previous location you may have a bad unit that needs to be replaced. It should not reboot itself during normal use.
 

·
Hall Of Fame
Joined
·
2,010 Posts
skyviewmark1 said:
Haven't seen a heat issue yet with my 622. It is on the bottom with a 625 and a 522 stacked on top of it. And all are in an enclosed cabinet area. I keep looking to see if there are any temperature issues but so far nothing. I know it's not ideal to have the 622 on the bottom. But so far temp has not gotten to high.
Good luck with that! My 622 runs hotter than I would like sitting on an open shelf all by itself. Heat kills. Lots of people have added laptop coolers under their 622s to cool them down.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top