Joined
·
17 Posts
I have been trying to figure this out for a month, I have the Premier Package, HD Access, Networks East/West, The CW and the $4.99 HD Only package. Oridginally when I installed my dish and 4 recievers I used a Zinwell 6 by 16 multi-switch, when I started everything up I was missing my even transponders for 103(B) as well as one transponder for both 110 and 119. So I took out the 6 by 16 multi-switch and found that I did not even need it in the first place! So I hooked each of the four lines from my Slimline 5-lnb into each receiver and proceeded to check the sirnal strentghs again, this time all of my transponders worked and I had signal strentghs in the 80's on most of the transponders. So I proceeded to check each one of my HD channels and for some reason the hd channels between cnn HD to cnbc HD were showing "Channel not purchased" so I called to have them send the package out again but nothing changed. I was looking on this website and found that I should have Ch. 498 and it should say congrats on getting hd but I don't even have Ch. 498 but I do have 480-481 and they say hd successfully installed. Any help would be appreciated!