[lakergrad]

I'm in need of a single Pro Plus LNB and I adapter. Anyone have these available or know of a source?

Thx!
Patrick

 

[derwin0]

I'm in need of a single Pro Plus LNB and I adapter. Anyone have these available or know of a source?

They don't make any DPP Singles or DPP Duals, only DPP Twins.
It you only want a single point, you'll need a DP Dual feeding into a DPP33 or DPP44 switch.

 

[boba]

They don't make any DPP Singles or DPP Duas, only DPP Singles.
It you only want a single point, you'll need a DP Dual feeding into a DPP33 or DPP44 switch.

I think you meant to say they only make DPP Twins.

 

[boylehome]

You can go to this site to get the "I" adapter: http://www.dishstore.net/index.php?cPath=65

 

[lakergrad]

Thanks! One last question. I think I understand the LNB now. If I run a Legacy, and gave only one receiver, does it make a difference which side a connect to?

 

[boylehome]

You can not use legacy with DP or DPP equipment. You can use a DP dual to the input of a DPP Twin. All DP works with DPP equipment. Legacy, If you have a dual, either side is fine. Legacy twin you should use the 119 side.

 

[harsh]

Thanks! One last question. I think I understand the LNB now. If I run a Legacy, and gave only one receiver, does it make a difference which side a connect to?

You need a legacy adapter to connect a junker receiver to DP or DPP.

Rather than making us run around in circles trying to put your puzzle together, I would ask that you tell us what you have now for dish(es), switches and receivers and where you want to go.

 

[James Long]

You need a legacy adapter to connect a junker receiver to DP or DPP.

Legacy can connect directly to DPP, but you do need at least one DP receiver connected to DPP to make it work.