DBSTalk Forum banner
1 - 3 of 3 Posts

·
Cool Member
Joined
·
21 Posts
Discussion Starter · #1 ·
I have both an HR34 (with 2 clients) and HR24. Installer connected the router to the CCK and it seemed to cause my router to go in and out often. I removed the router connection from the CCK and plugged it directly into the HR34. I haven't seen any issues since I changed the wiring and all devices seem to stay constantly connected to router (including HR34)....am I causing myself any issues by connecting directly to the receiver?

Any other tricks to ensure the connection is as stable as possible and doesn't conflict with other devices trying to access the same network.

Thanks!
 

·
Honi Soit Qui Mal Y Pense.
Joined
·
15,541 Posts
Nice work!

One thing that a number of us have done is set fixed IPs on our DVRs. There are at least two schools of thought, so I'll describe mine only: I set my IPs on my three units to end with .24, .25 and .34. You can guess what receivers I have! I did no reserving on the router whatsoever, and those numbers are well within its range. I monitored my usage, and never was an address higher that .11 taken for any wired or wireless units.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top