DBSTalk Forum banner
1 - 6 of 6 Posts

· New Member
Joined
·
7 Posts
Discussion Starter · #1 ·
When I got direct tv with my new Vizio PHD50 2 yrs ago the installer programmed my remote and it worked fine except for the tv input.

Now I just replaced my vizio with a Panasonic TH-C50FD18 (Costco) which is the same as the TH-50PZ80U. I've tried so many codes, from the ezremote link and I can't get anyone to work and I tried both Panny model numbers.

Has anyone gotten this to work -- I have my receiver working on av2 and dvd on av1 no problem.

I would appreciate any suggestions, Thnx
 

· Registered
Joined
·
5,451 Posts
jperezmvp said:
When I got direct tv with my new Vizio PHD50 2 yrs ago the installer programmed my remote and it worked fine except for the tv input.

Now I just replaced my vizio with a Panasonic TH-C50FD18 (Costco) which is the same as the TH-50PZ80U. I've tried so many codes, from the ezremote link and I can't get anyone to work and I tried both Panny model numbers.

Has anyone gotten this to work -- I have my receiver working on av2 and dvd on av1 no problem.

I would appreciate any suggestions, Thnx
Here are two different codes I found at Directv Remote Control Site

Television
Panasonic

Brand: Model (optional):
TH-C50FD18

We could not find an exact match, we think this code will work.
10650

Setup Instructions
Set the "Mode Switch" to TV.
Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
Enter the 5 digit Code above.
Try your new code and tell us how it worked!

Brand: Model (optional):
Panasonic

Brand: Model (optional):
TH-50PZ80U

The following code should work with your model.
11480

Setup Instructions
Set the "Mode Switch" to TV.
Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
Enter the 5 digit Code above.
Try your new code and tell us how it worked!
 

· New Member
Joined
·
7 Posts
Discussion Starter · #3 ·
Thanks Spanky but it did not work, I can format it , change channel using the numbers or the chan up down but I can't control the volume or the tv input button with the RC64R remote.

any other suggestions?
 

· Remote Master
Joined
·
1,820 Posts
jperezmvp said:
Thanks Spanky but it did not work, I can format it , change channel using the numbers or the chan up down but I can't control the volume or the tv input button with the RC64R remote.

any other suggestions?
try the following to get the volume:

1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 9 3
4. press SELECT

To get the tv input:

1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 6 0
 

· New Member
Joined
·
7 Posts
Discussion Starter · #5 ·
Edmund said:
try the following to get the volume:

1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 9 3
4. press SELECT

To get the tv input:

1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 6 0
I was just able to try it today and it worked like a charm.
Thanks Edmund, I appreciate the help.
 

· New Member
Joined
·
1 Posts
Edmund said:
try the following to get the volume:

1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 9 3
4. press SELECT

To get the tv input:

1. tv
2. press and hold MUTE & SELECT for two blinks
3. enter 9 6 0
Perfect! Worked perfect for a Panasonic 46" TH-46PZ80U. Allowed me to control input with the TV Input button on the directv remote.

Thanks Edmund!!!
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top