DBSTalk Forum banner
Status
Not open for further replies.
1 - 20 of 52 Posts

·
Legend
Joined
·
117 Posts
Discussion Starter · #1 ·
Does anybody have any idea when the new software update for the D11 will be coming?
Thanks,
Shamus46
 

·
Lifetime Achiever
Joined
·
30,092 Posts
The next release is still in testing.
 

·
New Member
Joined
·
4 Posts
I have a D11-100 receiver, I did a force update on it and it downloaded new software, version 0x1040.
The only change I could find was the addition of the mini-guide, access it by pushing the blue button on the remote just like on the R15. :up:

Dave
 

·
Lifetime Achiever
Joined
·
30,092 Posts
Dave13 said:
I have a D11-100 receiver, I did a force update on it and it downloaded new software, version 0x1040.
The only change I could find was the addition of the mini-guide, access it by pushing the blue button on the remote just like on the R15. :up:

Dave
Are you sure it is a D11 and not a D10?
 

·
Hall Of Fame
Joined
·
1,026 Posts
On My D10-100 I tried the forced update this morning and got 0x1040 and I noticed the mini guide, better program descriptions when I hit the info button, and caller ID is showing phone numbers again, before 0x1040 the Caller ID would just show the person name who was calling never the phone number. Earl you wouldn't happen to have the release notes for this update yet.
 

·
Hall Of Fame
Joined
·
4,792 Posts
shamus46 said:
I forced the update on my D11 today and the caller ID still dosen't work. :(
Well let's run through the list:
1.You subscribe to Caller ID through your phone company.
2.You have turned on the feature through the Menu on the receiver.
3.The history of the feature is empty.
4.You have tried a Caller ID phone with the same cable/outlet and it works.
5.You have reset the receiver.
Well that's it if all of these fail recommend you change out the receiver.
Good Luck!:)
 

·
Legend
Joined
·
117 Posts
Discussion Starter · #13 ·
Jhon69 said:
Well let's run through the list:
1.You subscribe to Caller ID through your phone company.
2.You have turned on the feature through the Menu on the receiver.
3.The history of the feature is empty.
4.You have tried a Caller ID phone with the same cable/outlet and it works.
5.You have reset the receiver.
Well that's it if all of these fail recommend you change out the receiver.
Good Luck!:)
I've done all the above. :(
Thanks
 

·
Hall Of Fame
Joined
·
4,792 Posts
shamus46 said:
I've done all the above. :(
Thanks
Ok let's try this:
1.Redownload software 0x1040.
2.Push Menu button to access Quick Menu.
3.Select Caller ID & Msgs.
4.Select Turn Off Notices then push Exit Button.
5.Repeat 2 & 3.
6.Select Turn On Notices then push Exit Button.
This works on my D11-500.Hope it fixes your problem too.
Good Luck!:)
 

·
Legend
Joined
·
117 Posts
Discussion Starter · #15 ·
Jhon69 said:
Ok let's try this:
1.Redownload software 0x1040.
2.Push Menu button to access Quick Menu.
3.Select Caller ID & Msgs.
4.Select Turn Off Notices then push Exit Button.
5.Repeat 2 & 3.
6.Select Turn On Notices then push Exit Button.
This works on my D11-500.Hope it fixes your problem too.
Good Luck!:)
Nope, that didn't do it either. I guess it's time for Direct to send me a new receiver.
Thanks for trying.
 

·
Hall Of Fame
Joined
·
4,792 Posts
shamus46 said:
Nope, that didn't do it either. I guess it's time for Direct to send me a new receiver.
Thanks for trying.
Your welcome.Wish these suggestions would have solved your problem.Hope a different receiver does.

I sent an email to Tech support concerning improvements to software 0x1040.I received an email back telling me that I did not have software 0x1040.So at least it's nice that these CSR's are consistant.:lol:
 

·
Hall Of Fame
Joined
·
4,792 Posts
rgraham541 said:
D10-300 update? :rolleyes:

Tried a force and saw a 1080 ? D10-300 didnt like something...hung at 98% complete
Keep us informed.Maybe there's a certain time of day to download that's better.I try to do mine in the late evening.You should get 0x1040,maybe that's why it hung up.Good Luck!:)
 

·
Lifetime Achiever
Joined
·
30,092 Posts
The other D10/D11 models are getting the updates.
The D10-300 is the exception though. DirecTV is still finishing up the testing for that particular model
 
1 - 20 of 52 Posts
Status
Not open for further replies.
Top