DBSTalk Forum banner
1 - 11 of 11 Posts

· Mentor
Joined
·
38 Posts
Discussion Starter · #1 ·
I lost my Directv signal to trees a while back. I've removed several trees and now can only get a signal from transponders 28, 30 & 32 on the 101 satellite. The strength is a solid 85 on all three. All the others are 0.

I'm using an old 18" standard dish. Both an old Hughes SD receiver and an H20 confirm those three transponder signals.

Is there a tree still in the way? Is the LNB bad? Is this not a Directv satellite I'm picking up?

Please help!!
 

· Genius.
Joined
·
19,830 Posts
"Void4545" said:
The signal strength window says the 101 satellite is selected. I've panned the dish left and right to the southeast and those three transponders are all I can find.
right, but the screen is showing transponders 28, 30 and 32 which comes form the 110 satellite
 

· Genius.
Joined
·
19,830 Posts
depends in which coast you are located.
 

· Legend
Joined
·
264 Posts
The primery Satellite is the 101, is does not matter what kind of dish you are using or the program package, use the 101 for every aligment.

101 is the satellite location in the sky and if you look at a map with the latudide overlay, it is centered over southeast Texas.

From portland Or, you should be aiming at 134 magn (+/-) with a elev of 33.2,
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top