are those readings for all units or just some / oneTebbens said:I'm running a Slimline 5 to a Spaun Multiswitch (WBS41602NF), then
to a few HR20s and an HR21. I live on the east coast about 60 miles
north of NYC.
Last night out of no where I get Searching for Signal...and not a cloud in the sky.
Whats unusuall is that some satellites and transponders do get signal....
101
All 0's except for 8, 10, 12, 24, 26, 28, 30, 32 which are high 80's to mid 90's.
110
All 3 are in the mid 90's.
119
22,23,25,27,29,31 are all 0's
24,26,28,30,32 are mid 90's
103c
1,3,5,7,9,11,13 are all 0's
2,4,6,8,10,12,14 are low 80's
Any ideas on what could be causing such readings ??
Thanks !
Problem LNB, Switch or Something Else ??
I'm running a Slimline 5 to a Spaun Multiswitch (WBS41602NF), then
to a few HR20s and an HR21. I live on the east coast about 60 miles
north of NYC.
Last night out of no where I get Searching for Signal...and not a cloud in the sky.
Whats unusuall is that some satellites and transponders do get signal....
101
All 0's except for 8, 10, 12, 24, 26, 28, 30, 32 which are high 80's to mid 90's.
110
All 3 are in the mid 90's.
119
22,23,25,27,29,31 are all 0's
24,26,28,30,32 are mid 90's
103c
1,3,5,7,9,11,13 are all 0's
2,4,6,8,10,12,14 are low 80's
Any ideas on what could be causing such readings ??
Thanks !
to a few HR20s and an HR21. I live on the east coast about 60 miles
north of NYC.
Last night out of no where I get Searching for Signal...and not a cloud in the sky.
Whats unusuall is that some satellites and transponders do get signal....
101
All 0's except for 8, 10, 12, 24, 26, 28, 30, 32 which are high 80's to mid 90's.
110
All 3 are in the mid 90's.
119
22,23,25,27,29,31 are all 0's
24,26,28,30,32 are mid 90's
103c
1,3,5,7,9,11,13 are all 0's
2,4,6,8,10,12,14 are low 80's
Any ideas on what could be causing such readings ??
Thanks !
1 - 9 of 9 Posts
are those readings for all units or just some / oneTebbens said:
All units get the same readings.curt8403 said:are those readings for all units or just some / one
satellite needs peaking or Multiswitch has issues. are there any open ports on the multiswitch?Tebbens said:All units get the same readings.
I don't think it needs peeking, everything was in the mid 90's before this.curt8403 said:satellite needs peaking or Multiswitch has issues. are there any open ports on the multiswitch?
Yes, I believe there are some ports connected to RG6, but no receiver at
the other end yet.
I had the exact same problem (even TPNs were good, odd were bad). It was a bad LNB. Not sure if that is the only thing that causes it, but it definately was in my case.
swap a known bad connection to an unused port to see if it helps.Tebbens said:I don't think it needs peeking, everything was in the mid 90's before this.
Yes, I believe there are some ports connected to RG6, but no receiver at
the other end yet.
It may be the LNB
Do unused ports on the spaun need to be terminated ??curt8403 said:swap a known bad connection to an unused port to see if it helps.
It may be the LNB
Directly at the switch or can I terminate at the room ?
1 - 9 of 9 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
DBSTalk Forum
A forum community dedicated to digital bit streaming enthusiasts. Come join the discussion about programming, content, and reception, home theaters, displays, models, styles, satellites, reviews, accessories, classifieds, and more!
Full Forum Listing
Recommended Communities
