DBSTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Hall Of Fame
Joined
·
1,026 Posts
I have 10F1 and I tryed it with my RC 32RF Remote and it did not work. After I pressed select the receiver made the error sound when you hit a wrong button then the receiver would not respond to any commands from the remote so RF is still not activated on the R15s.


Edit: I took an Coxial Cable and cut it and stripped it down to the wire and hooked up to the RF Remote on the back and tried the code again and it worked so I was wrong and the RF is activated on the R15s.
 

·
Hall Of Fame
Joined
·
1,026 Posts
prashp1 said:
I activated the RF on the remote. I have R15-300. When in Guide and other screens, I keep holding channel up or down to scroll through the screen up or down, it doesn't work. I have to keep pressing channel up or down in order to scroll through the screen. Anyone have similar problem? I even disabled RF and activated it again. Please help.
I just checked my remote and it is working fine for me on my R15-500.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top