DBSTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Mentor
Joined
·
46 Posts
Are you saying that stripped down coxial cable is working as well as an antenna?

Thanks in advance,

Greg

bjflynn04 said:
I have 10F1 and I tryed it with my RC 32RF Remote and it did not work. After I pressed select the receiver made the error sound when you hit a wrong button then the receiver would not respond to any commands from the remote so RF is still not activated on the R15s.

Edit: I took an Coxial Cable and cut it and stripped it down to the wire and hooked up to the RF Remote on the back and tried the code again and it worked so I was wrong and the RF is activated on the R15s.
 

·
Mentor
Joined
·
46 Posts
I have the R15-300, and a RC32RF. The RF function works great EXCEPT the press and hold functions do not work for me. For example, the jump to end with the press/hold of the 30sec skip button. The remote os very nice aside from this.

gct said:
I'm using the Rc32RF with an R15-300.

The 'press-and-hold' functions all work fine, just as they did with the RC32RF set to IR.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top